Advertisement
If the CHROMA
Control
(47) is turned
fully to the
MIN position and the position of the R/G/B Control
(46) to the center, a Black and White video image
is obtained.
When adjusting the R/G/B Control (46)
from this position,
a mono tone (R/G/B) video image is
obtained.
Notes:
1. A Black and White video image may be obtained
in another way.
Press the Color-A Button (49) or
Color-B (50) Button once (The LED blinks).
Turn
the CHROMA Control (47) fully to MIN position.
2. When pressing the Color Correction Button to turn
on while turning on the Position On/Off Button, the
LED on the Position On/Off Button blinks for the
stnad-by mode, the positioning scene is kept and
the color correction is available.
B-5. Position Control
The position of a specific wipe pattern can be changed
on the monitor screen using Position Control function.
Press the Square Wipe Button (13) and select the
desired wipe pattern by pressing this button repeatedly.
Press the Position On/Off Button (45) on. The LED on
this button lights. (Wipe size is doubled.)
Adjust the Mix/Wipe Lever (58) to obtain the desired
wipe size.
Operate the Positioner Joystick (46). The position of a
wipe scene can be changed on the monitor screen.
Note:
When pressing the Position On/Off Button to turn
on while turning on the Color Correction On/Off
Button, the LED on the Color Correction On/Off
Button
blinks
for the stand-by
mode
and
the
corrected color scene is kept and position control
iS available.
Zs.
C.
Basic Operation 2
Digital Effect block
The following is a detailed description of the Digital Effect
block function which generates digital special effects for
the A-bus and B-bus source video signals. In order to add
the desired effect(s) to the A-bus (B-bus) signal, press the
A-Button (21) (B-Button (22)) and the ON-Button (20).
Notes:
7
The selected effect(s) can be added to either the A-bus
or B-bus at one time.
Without pressing the Effect On/Off Button (20), the
digital effect(s) will not added to the A-bus or B-bus
signal.
Negative
Press the NEGA Button (25). A negative image (like a
film negative) is obtained. Color correction can also be
used with this function.
Normal Image
Negative Image
MOSAIC
Press the MOSAIC Button once (24). A mosaic-like or
box-like pattern is obtained.
Mosaic pattern size can
be adjusted continuously at 31 steps with SIZE Control
(23).
Normal Image
Advertisement
