EGO POWER+ CS2000 Operator's Manual page 27

INSTALLING/REMOVING THE BATTERY PACK
NOTICE:
The fuel-gauge circle on the LCD screen indicates the battery-charge level
(Fig. 8). Fully charge your battery pack before first use.
To install battery pack (Fig. 10)
1. Align the ribs of the battery pack
with the mounting slots in the chain
saw's battery port.
2. Slide the battery pack into the
machine until it snaps into position.
WARNING:
latch on the chain saw snaps in place and
the battery pack is secured to the chain saw before beginning the operation. Failure
to securely seat the battery pack could cause the battery pack to fall out, resulting in
serious personal injury.
To remove battery pack (Fig. 11)
WARNING:
location of your feet and children or pets
around you when pressing the battery
release button. Serious injury could result
if the battery pack falls. NEVER remove
the battery pack at a high location.
1. Hold the battery pack in the palm of
your hand.
2. Press the battery release button with your thumb and the battery pack will
disengage from the latch.
3. Grasp the battery pack and remove it from the chain saw.
WARNING:
and keep hands clear of the lock-off button and trigger switch when carrying or
transporting the chain saw.
56V LITHIUM-ION CORDLESS 20" CHAIN SAW — CS2000/CS2000-FC
Make sure that the
Always be aware of the
To avoid serious personal injury, always remove the battery pack
10
11
27