EGO POWER+ CS2000 Operator's Manual page 15

◾
Avoid unintentional contact
with the stationary saw chain or
guide bar rails. These can be very
sharp. Always wear gloves and long
pants or chaps when handling the
chain saw, saw chain, or guide bar.
◾
Never operate a chain saw
that is damaged or improperly
adjusted or that is not
completely and securely
assembled. Be sure that the saw
chain stops moving when the trigger
switch is released.
◾
When bucking, secure the work
piece prior to cutting. When
felling or pruning, identify and
secure hazardous branches.
◾
Aggressive or abusive cutting
or misuse of the chain saw can
cause premature bar, chain,
and/or sprocket wear, as well as
a broken chain or bar, leading
to kickback, chain throw or the
ejection of material.
◾
Never use the guide bar as a
lever. A bent guide bar can cause
premature bar, chain, and/or sprocket
wear, as well as a broken chain or
bar, leading to kickback, chain throw
or the ejection of material.
◾
Cut only one workpiece at a time.
◾
Use only with the battery packs and chargers listed below:
56V LITHIUM-ION CORDLESS 20" CHAIN SAW — CS2000/CS2000-FC
6
Linear kickback
7
Pull
Push
Pinch
15