Advertisement
Available languages
Available languages
Quick Links
H-11137, H-11138
H-11139
METRO BAR HEIGHT TABLE
TOOLS NEEDED
5 mm Allen Wrench
4 mm Allen Wrench
(included)
Round Tabletop x 1
Top Plate x 1
NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching.
• Check that all parts are included.
1. Connect base to column using three M8 x 30 mm
flat head bolts (A). Tighten using 5 mm Allen wrench.
(See Figure 1)
NOTE: Top plate and base can be attached to
either end of column.
PAGE 1 OF 6
1-800-295-5510
uline.com
Two Person Assembly
Recommended
PARTS
Base x 1
Column x 1
ASSEMBLY
Pour le français, consulter les pages 5-6.
Hardware Kit
A
M8 x 30 mm
Flat Head Bolt x 3
C
M6 x 15 mm Bolt x 4
Figure 1
Column
M8 x 30 mm
Flat Head Bolt (A)
Para Español, vea páginas 3-4.
B
M8 x 30 mm
Round Head Bolt x 3
Base
1023 IH-11137
Advertisement
Related Manuals for U-Line METRO H-11137
Summary of Contents for U-Line METRO H-11137
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-11137, H-11138 1-800-295-5510 H-11139 uline.com METRO BAR HEIGHT TABLE TOOLS NEEDED Two Person Assembly 5 mm Allen Wrench Recommended 4 mm Allen Wrench (included) PARTS Hardware Kit Base x 1 Round Tabletop x 1 M8 x 30 mm M8 x 30 mm...
- Page 2 ASSEMBLY CONTINUED 2. Connect top plate to column using three 4. Bar height table is now fully assembled. Carefully flip M8 x 30 mm round head bolts (B). Tighten the table onto base. using 5 mm Allen wrench. (See Figure 2) Completed Assembly Figure 2 M8 x 30 mm...
-
Page 3: Herramientas Necesarias
H-11137, H-11138 800-295-5510 H-11139 uline.mx MESA ALTA – COLECCIÓN METROPOLITANA HERRAMIENTAS NECESARIAS Se Recomienda Armar Llave Allen de 5 mm Entre Dos Personas Llave Allen de 4 mm (incluidas) PARTES Kit de Tornillería 1 Base 1 Cubierta de Mesa 3 Pernos de Cabeza Plana 3 Pernos de Cabeza Redonda M8 x 30 mm... - Page 4 CONTINUACIÓN DEL ENSAMBLE 2. Conecte la placa superior a la columna utilizando 4. La mesa alta quedó ensamblada por completo. tres pernos de cabeza redonda M8 x 30 mm (B). Voltee con cuidado la mesa sobre la base. Apriete con la llave Allen de 5 mm. Ensamble Terminado (Vea Diagrama 2) Diagrama 2...
-
Page 5: Montage
H-11137, H-11138 1-800-295-5510 H-11139 uline.ca METRO – TABLE HAUTE DE BAR OUTILS REQUIS Montage à deux Clé Allen de 5 mm personnes recommandé Clé Allen de 4 mm (inclus) PIÈCES Matériel de fixation Base x 1 Surface de table ronde x 1 Boulon à... - Page 6 MONTAGE SUITE 2. Fixez la plaque supérieure à la colonne à l’aide de 4. Le montage de la table haute de bar est trois boulons à tête ronde M8 x 30 mm (B). Serrez le maintenant complété. Remettez avec soin la table tout à...