Table of Contents
Advertisement
• Use cable ducts to lay cables through walls with sharp edges.
• Do not lay loose or bent cables next to electrically conductive materials (metal).
• Do not pull on the cables.
• Check that cabling will not be subject to wear, corrosion, excessive pressure, vibration, sharp edges
or any other adverse environmental effects. The check shall also take into account the effects of ag-
ing or continual vibration from sources such as compressors or fans.
• Observe the structural strength of the roof of the vehicle. The roof of the vehicle must be able to
bear the weight of the roof air conditioner without being indented or deformed. In doubt consult
the vehicle manufacturer.
NOTE
• You find the appliance's specifications in the
data plates:
• Roof top unit data plate
• ADB data plate
Find more information on roof air conditioners in the operating manual, such as the
technical description or the controls, see qr.dometic.com/besLup.
Fig.
on page 9
Fig.
on page 9
2
Dometic FreshJet 7 Series Lite 48 V EN
Technical data
on page 18 and on the following
9
Advertisement
Table of Contents
