Dometic FreshJet 7 Lite 48 V Series Installation Manual page 11


4. Drill out the corners (A).
NOTICE! Damage hazard
Ensure that no electrical power cables are damaged. Check where the electrical cables are located.

5. Carefully cut out the opening on the roof using a keyhole saw or a similar tool (B).
6. Check whether the roof hole needs reinforcing.
7. If needed, remove the foam according to the width of your reinforcing rails (not in scope of delivery) (A).
A
4x
1.
Dometic FreshJet 7 Series Lite 48 V EN
1.
2.
4x
2.
11