Table of Contents
Advertisement
AC Power Adaptor
r
Symptom
Cause
Corrective Actions
page
The POWER lamp does
not light.
-
Set the selector to the center position
and disconnect the power cord. After
about one minute, reconnect the
power cord and set the selector to
CHARGE again.
—
The CHARCE lamp
flashes.
See the following chart.
When the CHARGE Lamp Flashes
Check through the following chart.
» If you use a battery pack which you have just bought or which has been, left unused for a long time,
the CHARGE lamp may flash at the first charging. But this is not a problem. Repeat again to charge
with the same battery pack.
55
Advertisement
Table of Contents
