Connecting The Camera To The Pc - JVC GZ-MG335 U Instructions Manual

To
AC Outlet
AC Adapter
DC Jack
USB Port
t1======!J
USB Cable
USB Jack
Preparation:
Close the LCD monitor to turn off the camera.
Connecting the Camera to the PC
soflwlle:ttllilyooh¥vefMd.·«Yd4ICceptedel.\lf.lhelicltl'M
tt.i~oIt_i$c~\4)On}O..il/ll!1ftJlgtotheicllme
otlhewfll'l4leWI9JMlbe~!l3be~anceofthe
wi birldYOUlOihebffl:1terrMr.
41e:l)8II~ erkft~
"""
OK
4
Select the desired language and
click [OK].
S
Click [Yes].
The software installation starts.
6
Click [Finish].
• When installation is completed
The installed software is displayed in [All
Programs].
The backup destination folder [MyWorks]
for files is created on the hard disk drive
that has the most free space.
ImIiDI
• Never disconnect the USB cable while the
access/charge lamp on the camera lights or
blinks.
• Do not turn off the camera when the USB
cable is connected, to prevent malfunctions
of the PC.
• Connect the camera directly to the USB jack
on the PC, not through a hub.
• Do not use an extension USB cable.
• Saving the wrong kinds of files in a
recording medium or deleting files or
folders from a recording medium can cause
problems with the operation of the camera.
When it is necessary to delete a file from
a recording medium, delete it through the
camera. Also, do not move or rename
folders and files in the medium on PC.
25