JVC GZ-MG335 U Instructions Manual page 110

• Push the microSD card in a few more times. 19
6
66
64
31
• Touch the sensors with your finger. The sensors do not
function if you touch them with your finger nail or with
gloves on.
• Another operation is being attempted while a DVD burner
that is turned on is connected. Turn off the camera
connected to the DVD burner, or disconnect the USB
cable.
• There is a large number of still images (approx. 1,000 or 32
more) stored in the recording medium. Copy the stored
files to other devices, and delete them from the recording
medium.
• Remove protection from the files and delete them. 33
• The driving sound (hum) of the hard disk may have been
recorded if the camera was moved suddenly during
recording. Do not move or shake the camera suddenly
during recording.
• The temperature of the camera is increasing. If the
camera continues to heat up, playback may be stopped
to protect the recording medium. In this case, turn off the
power, and then wait until the camera cools down.
• Do not select the sepia (SEPIA) or monotone 30
(MONOTONE) mode before setting white balance.
• Replace the microSD card. (When the surface of the card
is damaged, difficulty in reading the data occurs.)
• Perform clean up or format the microSD card.
• Select the recording medium properly.
• To watch images on a TV, set the TV's input mode or
channel that is appropriate for video playback.
• The continuous shooting speed will drop after repeated
continuous shots, depending on the recording media, or
under certain recording conditions.
• Do not select the sepia (SEPIA) or monotone
(MONOTONE) mode before setting white balance.
,The [CREATE DVD] . .
.screen is
displayed in
the LCD, monitor, and ,;
no
other operations
can
be performed.
;
'Thet()~q~s~n~or
'senso~butto.'l
d
"function~
69