Table of Contents
Advertisement
REPLACING THE POWER SUPPLY CABLE
WARNING: If the power supply cable is damaged, it must be replaced only by an
authorized service agent in order to avoid a hazard.
Use the same type of power supply cable.
This cable must be connected to the terminal block following the diagram in fig. 3.1.
NOTE: The earth conductor must be left about 3 cm longer than the others.
The operations must be executed by a qualified technician.
SECTION OF THE SUPPLY CABLE
TYPE "H05V2V2-F" (resistant to temperatures of 90°C)
220-240 V
50-60 Hz
220-240 V
50-60 Hz
220-240 V
50-60 Hz
(*)
Connection possible with plug and outlet
(**)
Connection with wall box connection.
20
20
3 x 0,75 mm
(*) (**)
2
3 x 1 mm
(*) (**) (models with a rating of 1500 W at 230 V)
2
3 x 1,5 mm
(*) (**) (models with a rating of 3500 W at 230 V)
2
220-240 V ac
L1
PE
Fig. 3.1
N(L
)
2
Advertisement
Table of Contents
