FASTENING THE INSTALLATION BRACKETS
•
Each cooker top is provided with an installation kit including brackets and screws for
fastening the top to fixture panels from 2 to 4 cm thick.
•
Turn the cooker top upside down and fasten the brackets "A" to the appropriate socket
holes, without tightening the screws "B" for the moment.
•
Make sure that the brackets are fastened as shown in figure 1.4.
FASTENING THE COOKER TOP
•
Spread the sealing material "C" out along the fixture hole, making sure that the
junctions overlap at the corners.
•
Insert the cooker top into the hole and position it correctly.
•
Adjust the position of the brackets "A" and tighten screws "B" to block the cooker top
firmly in position.
•
With a sharp cutter or trimmer knife trim the excess sealing material around the edge
of the cooker top. Take care not to damage the benchtop.
B
Fig. 1.4
A
Fig. 1.5
10
10
(fig. 1.5)
C
A
A
(fig. 1.4)
A
A
A
A