The Buttons On Your Remote - Zenith VCP354 Operating Manual

The Buttons on Your Remote (SC354)
A quick list of all the buttons on your remote control and what they do.
EJECT — Ejects the tape from the VCP.
FF (Fast Forward)—Advances tape
rapidly.
MENU — Shows main menu.
PLAY — Begins tape playback.
POWER — Turns VCP On and Off. Also
turns VCP Timer Off and On, if
programmed.
REW — Rewinds tape to the beginning.
STOP — Cancels playback record modes.
A. (Auto) REPEAT — Enables auto
repeat. Tape will automatically rewind
when it reaches the end, then begin to
play again. Press a second time to disable
repeat.
TRACKING/SELECT ( / ) — To clear
streaks if they appear on the TV screen in
the playback mode. Select the desired
items on the MENU screen.
TV/VCR — Switches source of TV picture
between TV channel and VCP channel
selection. VCP functions are available in
VCR mode.
DISPLAY/OK
To display functions on the TV screen.
Switches the selected item on the MENU
screen.
O P E R AT I O N
power
rew
a.repeat
display
ok
Installing Batteries
Be sure to install the
batteries provided with
this remote. Match positive
(+) and negative (-) with
markings shown in battery
compartment.
Note: All VCP operations
and menu options can be
accessed by using the
remote control.
P A G E 1 1
eject
play
ff
stop
tv/vcr menu
trk
select