Zenith VCP354 Operating Manual page 10

P A G E 1 0 O P E R AT I O N
Controls and Indicators (Continued)
7. REW (Rewind/Reverse Search) Button
Press while the VCP is in Stop mode to
rewind the tape (no picture, no sound).
During tape playback, press to begin
Reverse Search; The picture portion of the
tape is played in the reverse direction at
high speed (sound is muted). Press STOP to
end rewind or search.
Press and hold while Rewind mode to begin
logic search, you can check what is on the
tape. When released, rewinding resumes.
8. FF (Fast Forward/Forward Search)
Press while the VCP is in the Stop mode to
fast forward the tape (no picture or sound).
During tape playback, press to begin
Forward search; The picture portion of the
tape is played at high speed (the sound is
muted). Press STOP to end fast forward or
search.
Press and hold while Fast forward mode to
begin logic search, you can check what is
on the tape. When released, Fast forwarding
resumes.
Playing a Video Cassette
• Turn on the TV.
• If the VCP is connected to the TV via the RF
OUT jack, tune the TV to the same channel
(3 or 4) as the Channel 3/4 switch on the
back of the VCP.
• If the connection in mode via the VCP's
Audio/Video Out jacks, your TV must be set
to receive audio and video from an auxiliary
source. (Refer to your TV operating
instructions.)
Normal TV Viewing
To watch TV, simply place VCP in TV mode by
pressing TV/VCR on the remote repeatedly until
the TV/VCR indicator light disappears from the
VCP front panel. If the TV antenna or cable-TV
line has been connected to the VCP as shown
in this manual, its signal will pass through the
turned-off VCP unaffected, as if connected
directly to the TV.
9. PLAY
Begins tape playback. The correct playback
speed is automatically selected.
10. Cassette Loading Compartment
Insert a VHS video cassette into the video
cassette compartment until it is
automatically drawn into the VCP. The
cassette can be inserted even when power
is off. Power turns on automatically and
playback begins.
CAUTION: DO NOT attempt to insert a
cassette into the compartment when the
power cord is unplugged.
CAUTION: DO NOT insert fingers into the
cassette compartment.
• To view a VHS cassette tape, insert it into the
cassette compartment. The VCP will
automatically turn on, play the tape to its
end, rewind the tape, eject the tape, and shut
off. If necessary, use the TRK (TRACKING)
control to adjust for the best picture.