Table of Contents
Advertisement
P A G E 6
I N S TA L L AT I O N
Hook-up
Refer to the following steps to hook up your Video Cassette Player easily and quickly.
Step 1: Identify the Connectors and Switches
Locate the following connectors and switch on the back of your VCP;
1.
Video Out Jack
Video output must be used in conjunction
with audio out connection.
2.
Channel 3/4 Switch
Output video channel switch.
3.
Ant In Jack
Input from external antenna or cable-TV
Line.
4.
RF Out Jack
Output to television.
Step 2: Select the Output Video Channel
Your VCP has been designed to transmit a signal
to channel 3 or 4 of your TV, TO get the proper
TV signal, set the Channel 3/4 switch on the
back of the VCP to the channel that provides
the best picture.
When playing a tape, the TV
must be tuned to the same
channel (3 or 4) as the
Channel 3/4 switch on the
VCP.
5.
DC Input Jack
Input from optional DC power source.
6.
Audio Out Jack
Audio output must be used in conjunction
with video out connection.
Note: Use of the Audio/Video Output jacks is
optional. Depending on the capability of your
TV, you may get improved picture quality
when using these connections.
1
2
CHANNEL
VIDEO
OUT
DC IN 12V
AUDIO
OUT
6
5
Note:
This only applies when the RF OUT connection is
used. If the VCP is connected to your TV via the
Audio/Video output jacks also, choose
appropriate input source at the TV, (TV Channel
3/4 or Audio/Video In.)
3
4
3
ANT.IN
3
4
RF.OUT
4
Advertisement
Table of Contents
