Pip (Picture-In-Picture) Feature; Watching Pip; Pip Size; Pip Aspect Ratio - Zenith P50W38H Installation And Operating Manual

PIP (Picture-In-Picture) Feature
PIP (Picture-In-Picture) Feature
- PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the
other source will show a smaller inset image.
W atching PIP
W atching PIP
Press the PIP button repeatedly to turn PIP on or off.
Component
PIP Aspect Ratio
PIP Aspect Ratio
Press the PIP ARC button. The sub picture appears as shown.
4 : 3

Moving PIP

Moving PIP
Press the WIN.POSITION button.
Press the D / E / F / G button repeatedly until desired posi-
tion is achieved. The sub picture moves up/down/left/right.
Win.position
▲
◀ ▶
▼
Selecting an Input Signal Source for the PIP
Selecting an Input Signal Source for the PIP
Use the SUB INPUT button to select the input source for
the sub picture.
Main Picture Source
Video
S-Video
Component 480i
Component 480p/720p/1080i
RGB and DVI
Video
10 : 30
16 : 9
Available Sub Picture Sources
S-Video, Component 480i/480p/720p/1080i, RGB, and DVI
Video, Component 480i/480p/720p/1080i, RGB, and DVI
Video,S-Video, RGB, and DVI
Video and S-Video
Component 480i, Video, and S-Video
PIP Size
PIP Size
Press the WIN.SIZE button and then use
change the sub picture size.
Win.size
F

Swapping PIP

Swapping PIP
Press the SWAP button to switch the main and sub pictures.
Component
Video
10 : 30
Main Picture Sub Picture
Operation
F / G button to
G
Component
Owner's Manual 23
Video
10 : 30