Pip (Picture In Picture) Feature; Watching Pip; Selection A Input Signal Source For Pip; Selecting Pip Sound Options - Zenith P40V24 Installation And Operating Manual

PIP (Picture-in-Picture) Feature
- PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large,
and the other source will show a smaller inset image.
- Select RGB input source before pressing PIP
- This function works only in the following resolution;
Component (480p, 720p, 1080i), RGB-PC 640x480, 800x600 (only in Vertical frequency 60 Hz)
- With PIP active, not all picture formats can be used for the main/sub picture.
W atching PIP
W atching PIP
Press the pip button to show the sub picture.
• Press the PIP button again to turn PIP off.
Selecting a Input Signal Source for PIP
Selecting a Input Signal Source for PIP
Press the input select button in PIP mode.
• Each time you press input select button, you toggle between Video, S-Video and Component.
Component source only works in 480i mode.
Selecting PIP Sound Options
Selecting PIP Sound Options
- Select RGB input source before pressing PIP.
- To use this function, connect PC video port to RGB-PC INPUT(VGA/SVGA) input and connect PC audio port to
AUDIO INPUT.
- Sound Select is always selected Sound[M] regardless of prior sound choice.
1. Press the menu button and then use
G
2. Press the button and then use
G
3. Press the button and then use
G
4. Press the button and then use
(inset image) sound (Sound[S]).
5. Press the enter button.

Moving the Sub Picture

Moving the Sub Picture
Press the position button in PIP mode.
• Each press of the position button will move the sub picture to a different position on the screen in a clockwise direction.
18
button to select the
D E
/
D E button to select PIP.
/
D E button to select Sound Select.
/
D E to select main image sound (Sound[M]) or PIP
/
menu.
G
Language
G
ARC
G
Screen Adj.
G
Orbiter
G
White Wash
PIP G G To Set
PIP
Transparency G
Set ID G