External Equipment Connections; Vcr Setup; Cable Tv Setup - Zenith P50W38H Installation And Operating Manual

External Equipment Connections

External Equipment Connections
NOTE: All cables shown are not included with the plasma display.

VCR Setup

VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and Monitor.
- Use the ISM Method feature to avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
picture from a VCR. If the 4:3 picture format is used; the fixed image, shown at the sides of the screen, may remain visible on
the screen.
How to connect
1. Connect the provided BNC-RCA adapter to the monitor's VIDEO
INPUT.
2. Connect the audio and video cables from the VCR's output jacks to
the monitor input jacks, as shown in the figure.
When connecting the monitor to VCR, match the jack colors (Video
= yellow, Audio Left = white, and Audio Right = red).
Mono VCR: Connect the video output cable from the VCR to the
VIDEO input on the monitor.
S-VIDEO VCR: Connect the S-Video output cable from the VCR to
the S-VIDEO input on the monitor. (Note that S-Video offers higher
picture quality).
How to use
1. Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner's manual.)
2. Use the INPUT SELECT button on the remote control to select
Video.
(If connected to S-VIDEO, select the S-Video input source.)
Cable Cable TV Setup TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The monitor cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
How to connect
1. Connect the provided BNC-RCA adapter to the monitor's VIDEO
INPUT.
2. Connect the audio and video cables from the Cable Box's output
jacks to the monitor input jacks, as shown in the figure.
When connecting the monitor to a Cable Box, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
How to use
1. Use the INPUT SELECT button on the remote control to select
Video.
2. Select your desired channel with the remote control for cable box.
Y P
B
R AUDIO L
AUDIO INPUT COMPONENT INPUT
VCR
S-VIDEO
OUT
(R) AUDIO (L) VIDEO
IN
Y P B P R
R
AUDIO L
AUDIO INPUT COMPONENT INPUT S-VIDEO VIDEO INPUT
(R) AUDIO (L)
TV
VCR
Installation
P
R
R AUDIO L (MONO)
S-VIDEO VIDEO INPUT AUDIO INPUT
R AUDIO L (MONO)
AUDIO INPUT
VIDEO
RF Cable
Cable Box
Owner's Manual 11