Pip (Picture In Picture) Feature; Watching Pip; Pip Size; Moving Pip - Zenith P42W24BX Installation And Operating Manual

PIP (Picture-In-Picture) Feature
PIP (Picture-In-Picture) Feature
- PIP lets you view 2 different inputs pictures (sources) on your monitor screen at the same time. One source will be large, and
the other source will show a smaller inset image.
- You can also adjust the PIP features in the PIP/DW menu (Except Swap function).
W atching PIP
W atching PIP
Press the PIP button repeatedly to turn PIP on or off.
Moving the PIP
Moving the PIP
Press the WIN.POSITION button.
Press the D / E / F / G button repeatedly until desired
position is achieved. The sub picture moves
up/down/left/right.
You can also move the PIP position with
in the menu.
Selecting an Input Signal Source for the PIP
Selecting an Input Signal Source for the PIP
Use the PIP INPUT button to select the input source for the sub picture.
Main Picture Source
Video
S-Video
Component 480i
Component 480p/720p/1080i
RGB and DVI
PIP Aspect Ratio
PIP Aspect Ratio
1. Press the MENU button and then use
G
2. Press the button and then use
3. Press the G button and then use
4. Press the ENTER button to save.
Component
Video
10 : 30
Win.position
▲
◀ ▶
▼
Available Sub Picture Sources
S-Video, Component 480i/480p/720p/1080i, RGB and DVI
Video, Component 480i/480p/720p/1080i, RGB, and DVI
Video,S-Video, RGB, and DVI
Video and S-Video
Video, S-Video, and Component 480i,
D / E button to select the
D / E button to select
button to select
D / E
PIP Size
PIP Size
Press the WIN.SIZE button and then use
change the sub picture size.
Swapping the PIP
Swapping the PIP
Press the SWAP button to exchange the main and sub pic-
tures.
Main Picture
menu.
.
or .
F / G
Win.size
F G
Component
Video
10 : 30
Sub Picture
PIP/DW
PIP/DW
Input
DW
PIP
PIP Input
Win. size
Win. position
G 4 : 3
PIP ARC
16 : 9
MENU Prev.
Owner's Manual 23
Operation
button to
Video
Component
10 : 30