Maxicode - Honeywell Granit XP 199xi Series User Manual

Character Replacements
from the
then appear properly.

MaxiCode

MaxiCode On/Off
MaxiCode Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 1-150. Minimum Default = 1, Maximum Default = 150.
Minimum Message Length
192
on page 286), and scan the value and the Save barcode
Programming Chart,
< Default All MaxiCode Settings >
On
(page 140) for additional information. Minimum and Maximum
beginning on page 291. The data characters should
Data Matrix Code Page
* Off
Message Length
Maximum Message Length
Granit XP User Guide