Models 112635 and 112636 -- Using the
Hose Wash
1. Place the hose entirely inside the gun washer.
2. Connect one end of the hose to the hose wash
bulkhead fitting. See Fig. 4.
3. Turn the hose/gun wash selector to HOSE WASH.
NOTE: When the selector is set for hose wash, the
solvent is routed through the hose wash bulkhead fit-
ting instead of the gun supports and spray nozzles.
4. Operate the gun washer as instructed below.
Operation
Hose Wash
Hose/Gun
Wash Selector
Fig. 4
Hose Wash
Bulkhead
Fitting
Husky Pump
Air Filter/Regulator
DO NOT change setting
Model 112-636 shown
308393
03305
13