Graco PRO-WASH 112636 Instructions-Parts List Manual page 12

Placing Cups and Pots in the Gun Washer
2 Quart Pressure Cups
Set the pressure cup over the spray nozzle. Refer to
Fig. 3.
Pressure Pots and Other Paint Containers
A kit, part no. 236906, is available for use with gun
washer models 112635 and 112636 to clean pressure
pots and other paint containers. The maximum height
and width of the container the pressure washers can
clean are shown below. See the manual supplied with
Typical Cleaning Station Use
Wire Trigger Lock
Long Gun Sup-
Fluid Inlet Adapter
Fig. 3
12 308393
Operation
port
Spray Nozzle
the kit (Manual 308414) to install and use this option.
See page 5 for kit description.
Container:
Gun Washer Maximum
Model No. Height
112635 14 in. (356 mm)
112636 14.5 in. (368 mm) 11 in. (279 mm)
NOTE: See page 6 for a description of Gun, Pressure
Cup, and Paint Container Cleaning Kits.
Short Gun Support
Maximum
Diameter
11 in. (279 mm)
Cup Cover Stem
03304