Tar River BWC Series Operator's Manual page 16

BWC Hydraulic Feed Wood Chipper
 Begin with the PTO Driveline level (0 degrees). Raise the implement at an angle no greater than 25
degrees from level. Check for any interference and the length of the PTO Driveline extended. Do not
exceed the maximum extended length!
 Next lower the PTO Driveline at an angle no greater than 25 degrees from level. Check for any
interference and the length of the PTO Driveline extended. Do not exceed the maximum extended
length!
Danger: Always make sure shields are in place before operating
the implement/tractor! Serious injury or death can occur!
Note: Some shields/parts are removed from image for clarity
Scan the QR code below for more detailed information on PTO installation.
PTO Driveline Instructions
Checking for PTO Driveline Interference:
Level 0°
16