Tar River BWC Series Operator's Manual page 15

BWC Hydraulic Feed Wood Chipper
 Apply multi-purpose grease to the outside of the inner driveline section. Assemble the outer and inner
drivelines.
 When fully extended, the maximum allowable length must have a minimum overlap of 1/3 the free
length of the inner and outer sections. Measure and record the maximum extended length for future
reference.
 Attach the outer PTO Driveline to the tractor implement input shaft and inner PTO driveline to the
implement input shaft.
 Pull both yoke ends to make sure they are properly seated on the input shafts. Warning: If the drive
lines are not properly seated, they can separate from the tractor or implement, causing extensive
damage and possibly serious injury or death.
 Raise and lower the implement to determine the maximum extended length. Make sure the maximum
extended length does not exceed the maximum length determined from step 2.
Danger: Always make sure shields are in place before operating
the implement/tractor! Serious injury or death can occur!
Note: Some shields/parts are removed from image for clarity
PTO Driveline Instructions
Checking PTO Driveline Extended Length:
15