Tar River BWC Series Operator's Manual page 20

BWC Hydraulic Feed Wood Chipper
Warning: Never attempt to inspect, remove or replace blades with tractor en-
gine running, PTO engaged, wood chipper flywheel rotating. Serious injury or
death can occur!
Blade removal/replacement
Open the upper flywheel housing by removing the hardware shown in the Fig. 1 below.
•
Slowly lift the upper flywheel housing and rotate it to the LH side of the wood chipper, Fig. 2.
•
Note: The upper flywheel housing is heavy and a helper is recommended. Keep bystanders away to
prevent injury. Be sure to support the upper flywheel housing to prevent damage to machine.
Upper Flywheel Housing
Fig. 1
Assembly
Operating Instructions
Remove
Hardware
20
Upper Flywheel Housing
Fig. 2