Table of Contents
Advertisement
Adding the hard drive (HDD)
9
Connect the other end of the new hard drive's signal cable to
the main board's SATA 2 port.
The hard drive supporting SATA 3.0 should be connected to
the SATA1 port to operate it with the SATA 3.0 feature.
SATA2 port
(second port)
(Connect this to the
new hard drive.)
•
Users should additionally purchase the necessary
connection cables.
•
The product may differ from the picture depending on the
model and selected specifications.
(for 400S7A/400S7B models only)
SATA1 port (first port)
(Connect this to the existing
hard drive.)
10
Fix the hard drive case in place with the screw.
11
Close the computer cover and refer to the manual for the
hard drive you purchased to set it up as necessary.
Chapter 3.
79
Settings and Upgrade
Advertisement
Table of Contents
