Samsung 400T7A User Manual page 76

Adding the hard drive (HDD)
5
Insert the new hard drive and secure it with four screws.
6
Connect the power cable and signal cable to the hard drive
and then install the hard drive case in the computer.
Connect this to the new hard drive.
Power cable
Signal cable Connect this to the
existing hard drive.
(for 400T7A/400T7B models only)
7
Connect the other end of the new hard drive's signal cable to
the main board's SATA 2 port.
The hard drive supporting SATA 3.0 should be connected to
the SATA1 port to operate it with the SATA 3.0 feature.
SATA2 port (second
(Connect this to the
new hard drive.)
• Users should additionally purchase the necessary
connection cables.
• The product may differ from the picture depending on the
model and selected specifications.
8
Secure the hard drive case in place using the screw.
(Refer to step 2 for the location of the screws.)
9
Close the computer cover and refer to the manual for the
hard drive you purchased to set it up as necessary.
Settings and Upgrade
port)
SATA1 port (first port)
(Connect this to the existing
hard drive.)
Chapter 3.
76