Table Of Contents - Zenith C32V23 Operating Manual & Warranty

Setup and Operation Checklist
Setup and Operation Checklist
(See page 5 for available connection and operational setup options.)
1. Unpack TV and all accessories.
2. Connect your TV to input sources: antenna and all video source equipment.
See pages 7 - 14.
3. Connect TV output to all external video and audio equipment
see pages 7, 15, 16.
4. Install batteries in remote control.
See any page 8 through 14.
5. Plug TV and source equipment into power outlets.
See pages 8 through 14.
6. Turn TV on.
See pages 17 (Front Panel) and 19 (Remote Control).
7. Choose on screen menu language.
See page 37. (English is selected.)
8. Use EZ Scan* to search for all channels in your area.
See page 18.
9. Turn video source equipment on.
10. Select viewing source for TV.
See pages 21 and 29
11. Fine-tune source image and sound to personal preference or as required by source.
See pages 30, 31, and 35.
12. Additional features Setup
See Table of Contents.
*EZ Scan/Channel Search Notes -Available Channels/Active Channels/DTV Channels
EZ Scan finds channels which have a signal present and are actively being broadcast. Some broadcasters do not provide or send or broad-
cast a signal continuously. As a result, some DTV channels may not be found with EZ Scan. If you know that there is a DTV channel that
was not found by EZ Scan, run EZ Scan again; when the DTV channel is actually sending out a program.
P A G E 6
206-3767