Autosearch - Zenith C32V23 Operating Manual & Warranty

Brand Code Auto Search
Use Auto Search to try all available brand codes to determine if your
multi-brand remote control can operate the device
1
Turn on the device you want to program the remote to operate.
2
With a small blunt object, press and hold PRG until the indi-
cator light turns on (about 3 seconds), then release PRG.
3
Press the button for the device you are trying to program:
CABLE, VCR, AUX, or TV.
4
Press and hold the CH+ or CH- button. When the device turns
off, release the CH+ or Ch- button. (During this procedure the
remote sends out a series of power on/off codes.)
5
To check the code, aim the remote at the device and press the
POWER button to turn the device on and off. Try other buttons
on the remote to operate other functions to determine if they
are also functional.
6
Push ENTER to save the code (The indicator light will flash 2
times and then turn off).
7
Press POWER to turn the device back on.
You can quickly get out of Auto Search by pressing PRG or not press-
ing any button for 20 seconds.
The Zenith remote may not be able to operate the device. If so, use
the device's original remote control.
Mini glossary
Auto Search Another way of finding a brand code for controlling auxiliary equipment such as a VCR, DVD player, etc. that is not
available through the regular remote brand code programming method.
206-3767
2
PRG
Indicator Light
CABLE VCR
SURF
4
VOLUME
4
1
4
7
0
MENU
RATIO
RECORD PAUSE
REWIND
5/7
POWER
3
TV
AUX
FLASHBK MUTE
CHANNEL
VOLUME
CHANNEL
2
3
5 6
8
9
-
6
ENTER
VIDEO
TIMER SOURCE
PLAY
F FWD
STOP
P A G E 4 5