Fronius AL 2300 Operating Instructions Manual page 52

1.
2.
3.
4.
5.
Disposal Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally responsible manner in accordance with the EU Di-
rective and national law. Used equipment must be returned to the distributor or
through a local, authorised collection and disposal system. Proper disposal of the
old device promotes sustainable recycling of material resources. Ignoring this
may lead to potential health/environmental impacts.
Packaging materials
Collected separately. Check your municipality's regulations. Reduce the volume
of the box.
52
Insulating parts
- notches
- burned off or torn middle bar
- scorched or torn-off shoulders
Nozzle fittings
- notches and burns on the front edge
- heavily covered in welding spatter
Spatter guard
- burned-off outside edges, notches
Contact tubes
- worn out (oval) wire entry and wire exit holes
- heavily covered in welding spatter
- burns on the tip of the contact tube
Gas nozzles
- heavily covered in welding spatter
- burned-off outside edges
- notches