CLEANING AND MAINTENANCE
•
Before cleaning or maintenance, turn the appliance o by pressing the Power button on the
control panel or remote control, wait for a few minutes then unplug from the mains socket.
Cleaning the Cabinet
•
Clean the appliance with a slightly damp cloth then dry with a dry cloth.
•
Never wash the appliance with water. It could be dangerous.
•
Never use petrol, alcohol or solvents to clean the appliance.
•
Never spray insecticide liquids or similar.
Cleaning the Air Filters
•
To keep your appliance working e ciently, clean the lter every
month of operation. The lter can take out like g to the right.
•
To avoid possible cuts, avoid contacting the metal parts of the
appliance when removing or re-installing the lter. It can result in
the risk of personal injury.
•
Use a vacuum cleaner to remove dust accumulations from the
lter. If it is very dirty, immerse in warm water and rinse a number
of times. The water should never be hotter than 40˚C.
After washing, leave the lter to dry then attach the intake grille to the appliance.
•
Start-End of Season Operations
Start of Season Checks
•
Make sure the power cable and plug are undamaged and the earth system is e cient.
Follow the installation instructions precisely.
•
End of Season Operations
•
To empty the internal circuit completely of water,
remove the cap.
Run o all water left into a basin. When all the water has
•
been drained, put the cap back in place.
•
Clean the lter and dry thoroughly before putting back.
Strictest operation environment
Cooling mode: 18 - 35˚C, 30%RH~90%RH
•
•
Heating mode: 10 - 25˚C, 30%RH~90%RH
25
Drain Outlet Drain Cap