Cleaning The Air Filter; Warning Display - Mistral MA02016KRY30 Instruction Manual

Cleaning the Air Filter

If the air filter becomes clogged
with dust/dirt, the air filter should be
cleaned every two weeks. Depending
on indoor air quality, more frequent
cleaning may be needed. A dirty air
filter will decrease airflow and reduce
efficiency.
1. Press the Power button to turn OFF the
air conditioner and pull out the plug from the
wall socket.
2. Remove the screw on bottom of filter.
Take off up and bottom filters from the air inlet
vents. (See illustration below).
3. Dust/Dirt clogged in the filter can
be removed by vacuum cleaner. If filter is very
dirty, wash it in lukewarm soapy water while
rubbing it gently with a brush. A mild detergent is
recommended.
4. Wipe the filter with a soft cloth soaked
in water and dry it up in the shade. Do not use
harsh cleaners or very hot water. Do not wash in
a dishwasher.
5. Allow filters to dry completely before
reinstalling. Replace the air filter as it was. Do not
operate the air conditioner without the air filters
in place.
After a Long Idle period and before
next use
1.
water completely.
2.
dry out the inside completely.
3.
unplug it from the wall socket. Clean the filter
and outer surface.
4.
reinstall the filter.
5.
controller and store with air conditioner in a
clean, dry location, away from direct sunlight,
extreme temperatures, and excessive dust.
6.
with air conditioner in a clean, dry area.

Warning Display

Screw
Water Full Indicator flashing indicates that
internal water tank is full.
This must be emptied first or will be unable to
operate the appliance.
13
Remove the drain plug and drain
Set the fan going for a few hours to
Switch the air conditioner OFF and
Allow it to dry completely, then
Take out batteries from remote
Remove air exhaust hose and store