In Focus; Speed Limited; Restart; Control System Temperature - Permobil R-net LCD User Manual

2.6.5

In focus

If the control system contains more than one method of direct control, such
as a secondary joystick module or a dual attendant module, then the module
that has control of the wheelchair will display this symbol.
2.6.6

Speed limited

If the speed of the wheelchair is being limited, for example, by a raised seat,
then this symbol will be displayed. If the wheelchair has been prevented from
driving, then the symbol will flash.
2.6.7

Restart

When the control system requires a restart, for example after a module re-
configuration, this symbol will flash.
2.6.8

Control system temperature

This symbol means that a safety feature has been triggered. This safety
feature reduces the power to the motors, and automatically resets when the
control system has cooled down. When this symbol appears, drive slowly or
stop the wheelchair. If the control system temperature continues to increase,
it can reach a level where the control system must cool down, at which point it
will not be possible to drive any further.
22 - R-net LCD control panel