Infrared Setup - Permobil R-net LCD User Manual

2.9.2

Infrared setup

The infrared setup menu can be accessed via the settings menu.
See 2.7 Settings menu, page 24.
On entering the infrared setup menu, the default appliances will appear. When
an appliance is selected, its commands are shown.
When a command is followed by a checkmark, it means that it has a stored
infrared code. When a command does not have a checkmark, its infrared code
has not yet been stored.
Infrared codes can be stored or deleted as described in the following sections.
42 - R-net LCD control panel