OPTEX FA Fastus UR-MS16DT User Manual page 7

Maintenance
Do not use thinner, benzene, acetone or kerosene to clean devices.
Handling Precautions
(2) Due to advances in technology, published content, including the hardware, software, and system
information published in this user's manual, is subject to change without notice.
(3) When using this product, it is the responsibility of the customer to ensure necessary safety designs in
hardware, software, and systems in order to prevent any threat to life, physical health, and property due
to product malfunction or failure.
(4) This product is not intended for use with nuclear power, railways, aviation, vehicles, medical equipment,
food-handling equipment, or any application where particular safety measures are required. Never use
(5) This product cannot be used in applications that directly or indirectly detect human bodies for the purpose
of ensuring safety. Do not use this product as a detection device for ensuring human safety.
(6) Do not use this product for the development of weapons of mass destruction, for military use, or for any
other military application. Moreover, if this product is to be exported, comply with all applicable export laws
and regulations, including the "Foreign Exchange and Foreign Trade Act" and the "Export Administration
Regulations," and carry out the necessary procedures pursuant to the provisions therein.
(7) For more details on conformity to the Restriction of Hazardous Substances Directive for this product,
please contact an OPTEX FA sales representative.
Before using this product, fully examine the applicable environmental laws and regulations, and operate
the product in conformity to such laws and regulations.
OPTEX FA does not assume any responsibility for damages or losses occurring as a result of
noncompliance with applicable laws and regulations.
Trademarks
• CC-Link IE Field and CC-Link IE TSN are registered trademarks of Mitsubishi Electric Corporation
managed by the CC-Link Partner Association.
• GX Works2 and GX Works3 are registered trademarks of Mitsubishi Electric Corporation.
• Other company, system and product names in this manual are the trademarks or registered trademarks of
their respective companies.
Notes on Overseas Regulations and Standards
To use this product as an EN standard compliant product, make sure to observe the following installation
• Install in a conductive enclosure (control panel, etc.).
• Use a power supply cable of 30 m or less.
Ramco Innovations www.optex-ramco.com
Safety Precautions
(800) 280-6933
v