Safety Precautions - OPTEX FA Fastus UR-MS16DT User Manual

Safety Precautions

This manual uses the following symbols to display safety precautions for ensuring safe operation of the UR-
MS16DT and UR-ME16DT IO-Link Master Unit (hereafter, "this product").
Precautions listed here describe important information about safety. Make sure to follow them accordingly.
Safety Symbols
The indications and their meanings are as follows.
WARNING
CAUTION
Notes
Do not disassemble, repair, modify, deform under pressure, or attempt to incinerate this product.
Do not use this product in water or in a location where it may be exposed to water. Do not use
this product if wet.
or liquids.
of the product.
Do not use this product in environments other than industrial environments. If used in other envi-
ronments, it may cause induction and radiation interference.
Do not install this product or its cables in any of the following locations.
1. Locations where dust, salt, iron powders, or vapor (steam) is present.
3. Locations where water, oil, or chemical splashes may occur.
4. Locations where heavy vibrations or impacts may occur.
5. Locations where the ambient temperature exceeds the rated range.
6. Locations subject to rapid temperature changes (or where condensation occurs).
8. Outdoor locations or locations subject to direct light.
Do not use the product at voltages or with AC power supplies that exceed the rated voltage.
Safety Precautions
ii
Ramco Innovations
Indicates that any improper operation or handling may result in moderate or minor
injury, and in rare cases, serious injury or death. Also indicates a risk of serious
property damage.
Indicates that any improper operation or handling may result in minor injury or property
damage.
WARNING
www.optex-ramco.com (800) 280-6933