Cleaning; Storage; Troubleshooting; Technical Data - Proficook PC-KM 1254 Instruction Manual

WARNING:
• Always disconnect the mains plug from the socket before clean-
ing.
• Never immerse the appliance in water for cleaning. This might
result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or abrasives for cleaning.
• Do not use acrid or abrasive cleaning agents.
Motor Housing
Clean the housing only with a damp cloth and a squirt of
detergent.
Mixing Bowl, Splash Guard, Protective Disk,
Kneading and Mixing Attachments
CAUTION:
The attachments are not suitable for cleaning in a dish-
washer. Heat and aggressive cleaning agents may warp
or discolour the attachments.
• Parts that have come into contact with food can be
rinsed with water.
• Dry all components well before re-attaching them to the
appliance.

Storage

• Clean the appliance as described. Let the accessories
dry completely.
• We recommend that you keep the appliance in the
original packaging, if you do not want to use it for a
longer period.
• Always store the appliance out of reach of children in a
well ventilated, dry place.
12
PC-KM1254_IM_01.2023

Cleaning

Problem Possible Cause
The Appliance without
appliance power supply.
cannot be
switched
on or stops
operation.
The swivel arm is
not locked in the
lowest position.
A safety switch pre-
vents operation.
The overheating
protection has
been activated. The
motor is too hot.
The appliance is
defective.
Model:.................................................................PC-KM 1254
Power supply:.....................................220 – 240 V~, 50 – 60 Hz
Power consumption: ...................................................2500 W
Protection class: .....................................................................
Net weight: ......................................................approx. 11.8 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This appliance has been tested according to all applicable,
current CE directives and built according to the latest safety
regulations.

Troubleshooting

Remedy
Check the socket with
another appliance.
Connect the power
plug properly.
Check the fuse.
- Check the proper
position of the
swivelling arm.
- Turn the control dial
to the left as far as it
will go.
Then select the de-
sired speed setting.
Let the appliance
cool down for at least
15 minutes before
switching it on again.
Contact our service
centre or a specialist.

Technical Data

19.01.23