Description; Purpose; Overview; Important Safety Instructions - GreenWorks BPB60L03 Operator's Manual

EN
1

DESCRIPTION

1.1

PURPOSE

The machine is used to propel air out of a tube to
move unwanted materials such as leaves in the yard.
Some machines also suck in leaves and small twigs
through a vacuum, and shred them into a bag.
1.2

OVERVIEW

4
Turbo button
1
Cruise control
2
lever
Trigger
3
Front blower tube
4
Rear blower tube
5
2 IMPORTANT SAFETY
INSTRUCTIONS
For household use.
READ ALL INSTRUCTIONS BEFORE
USING (THIS POWER TOOL)
Read and understand all
instructions before using this
product. Failure to follow all
instructions listed below may result
in electric shock, fire, and/or
serious personal injury. When
using an electrical appliance, basic
precautions should always be
followed, including the following:
• Do not use on wet surfaces.
• Do not charge the unit outdoors.
• Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
1
9 8
2
5
3
6
Connecting tube
6
Battery release
7
button
Battery
8
compartment
Harness
9
WARNING
English
• Use only as described in this
manual. Use only manufacturer's
recommended attachments.
• If appliance is not working as it
should, has been dropped, damaged,
left outdoors, or dropped into water,
return it to a service center.
• Do not handle appliance with wet
7
hands.
• Do not put any object into openings.
Do not use with any opening
blocked; keep free of dust, lint, hair,
and anything that may reduce air
flow.
• Keep hair, loose clothing, fingers and
all body parts away from openings
and moving parts.
• Use extra care when cleaning on
stairs.
• Do not operate power tools in an
explosive atmosphere, such as in
the presence of flammable liquids,
gases, or dust. Power tools create
sparks that may ignite the dust or
fumes.
• Never allow children to operate
the equipment. Never allow adults
to operate the equipment without
proper instruction.
• Wear heavy long pants, boots, and
gloves. Avoid loose garments or
jewelry that could get caught in
moving parts of the machine or its
motor.
• Do not force tool. Use the correct tool
for your application. The correct tool
will do the job better and safer at the
rate for which it is designed.
• Keep firm footing and balance. Do
not overreach. Overreaching can
result in loss of balance.
• Do not use the tool if the switch does
not turn it on or off. Any tool that
4