Key On Reset - Yamaha VL-1m Feature Reference

Feature Reference
HPF Cutoff Frq
Sets the cutoff frequency of the breath noise high-pass filter. Noise components
below the specified frequency are cut off.
LPF Cutoff Frq
Sets the cutoff frequency of the breath noise low-pass filter. Noise components
above the specified frequency are cut off.
• Virtually no breath noise sound will be produced if the high-pass filter is set
to a higher cutoff frequency than the low-pass filter.

Key On Reset

Determines the feel of the breath noise attack.
The noise generator is not reset for each note, result in a different, and
off
therefore natural, attack feel for each note played.
The noise generator is reset for each note, resulting in the same breath
on
noise attack feel for each note played.
Edit Mode