Table of Contents
Advertisement
1 Pitch (L Pitch)
Pitch Change
2 Pitch (R Pitch)
These two parameters individually set the pitch of the first and second pitch-
changed note between one octave below ("-12") and one octave above ("+12") the input
note. When the "Stereo" mode is selected, the "1 Pitch" parameter applies to the
left channel and the "2 Pitch" parameter to the right.
1 Fine (L Fine)
2 Fine (R Fine)
Permit fine tuning of the first and second pitch-changed note in 1-cent steps (1 cent
is 1/100th of a semitone). When the "Stereo" mode is selected, the "L Fine" param-
eter applies to the left channel and the "R Fine" parameter to the right.
1 Output (L Output)
2 Output (R Output)
Set the output level of the corresponding pitch-changed note. The higher the value
the higher the output level. When the "Stereo" mode is selected, the "1 Output"
parameter applies to the left channel and the "2 Output" parameter to the right.
Wet/Dry Balance
Sets the balance between the direct ("dry") and effect ("wet") sound. Higher values
produce a greater proportion of effect sound in relation to direct sound. When set to "0"
no pitch change effect is produced.
Feature Reference
Edit Mode
Advertisement
Table of Contents
