Table of Contents
Advertisement
Feature Reference
effect in response to higher controller values (e.g. increased breath pressure or higher
modulation wheel position), while minus values cause a decrease in growl effect in
response to higher controller values. The "Depth" setting is reflected in the graph to the
right of the parameters — the horizontal axis represents the controller value and the
vertical axis represents growl.
Curve
Determines the relationship between the controller value and growl. When set to
"0" the relationship is linear. That is, a change in the controller value produces a corre-
sponding change in growl. As the curve value increases the lower end of the controller
range has relatively little effect on the sound while higher controller values produce more
dramatic changes. Negative curve values have the opposite effect: the sound changes
dramatically at low controller values while higher values produce relatively little effect.
The "Curve" setting is reflected in the graph to the right of the parameters — the
horizontal axis represents the controller value and the vertical axis represents growl.
Value
Determines the amount of growl effect produced when the "Controller" param-
eter is set to "off". The higher the value the greater the effect.
•
No growl effect can be applied via any controller if the ELEMENT ENVE-
LOPE Growl page "Depth to Pres" and "Depth to BNoise"
parameter are set to "0" or the "Offset" parameter is set to "63" (
141).
10: Throat Formant
The § and ¶ buttons ("Bpag" and "Fpag") can be used to go directly
•
backward or forward to the next Element Controller page without having to
return to the directory.
The • button ("Para") can be used to go directly to the Throat Formant
•
parameter page (
LANEOUS directory. You can then return to the controller Throat Formant
page by pressing • ("Ctrl") again.
Edit Mode
Page 91), also available from the ELEMENT MISCEL-
Page
Advertisement
Table of Contents
