Table of Contents
Advertisement
Feature Reference
4: Rename File
This function can be used to rename a specified data file on a floppy disk inserted
in the VL1-m floppy disk drive. Five types of data files can be selected.
All
System
All Voice
1 Bank
1 Voice
File Rename Procedure
1.
Insert the Floppy Disk
Make sure the floppy disk containing the file you want to rename is properly
inserted in the VL1-m floppy disk drive.
•
Also make sure that the floppy disk's write protect tab is set to the "off" or
"write enable" position.
2.
Select a File Type and press [
Position the cursor at the type of file you want to rename, then press the [
button.
3.
Select a File and Press
When the file window appears, select the file you want to rename and press the
button ("Rnam").
4.
Enter a File Name
Enter a new name (maximum 8 characters) for the selected file (
•
File names which begin with or contain a space are not allowed.
5.
Press ] or [
Press the ] or [ button to close the name window.
Utility Mode
All system and voice data.
All Utility System page settings and internal Microtuning data.
All 128 voices in the VL1-m memory.
16 voices from 1 VL1-m memory bank (A ... H).
1 voice.
168
Page 31).
Advertisement
Table of Contents
