Table of Contents
Advertisement
Feature Reference
1: TG Setting
Master Tuning
-64 ... 63.
Fine tunes the overall pitch of the VL1-m in approximately 1.17-cent steps (a "cent"
is 1/100th of a semitone). The maximum minus setting of "-64" produces a downward
pitch shift of almost three-quarters of a semitone, and the maximum plus setting of "63"
produces an upward pitch shift of the same amount. A setting of "0" produces no pitch
change.
Reverb
off, on.
Turns the VL1-m's internal reverb system off or on. This can be handy if you want
to use an external signal processor for rverberation.
Output
Monaural, Stereo.
Determines whether the VL1-m output is delivered in mono or stereo. When the
"Monaural" setting is selected the same signal is output via the both the L and R OUT-
PUT jacks. Also, in the mono mode all parameters relating to panning or positioning in
the stereo sound field have no effect.
WX Lip
Normal, Expand.
This parameter can be set
to "Expand" when using a
WX11 or WX7 Wind Controller
in the tight-lip mode to expand
the normally limited lip pitch
bend range of these controllers
to the full range available on the
VL1-m.
Set to "Normal" when
using a WX11 or WX7 in the
loose-lip mode, or when using a
keyboard or other non-wind
controller.
Utility Mode
tight-lip
63
31
0
-16
-63
Expand
153
loose-lip
63
0
-63
Normal
Advertisement
Table of Contents
