Table of Contents
Advertisement
The Utility Mode
The QY300 utility mode includes a number of functions that are important for general
operation — e.g. MIDI data handling, interfacing with external equipment, ABC system
operation, and more. Press the [UTILITY] mode key to go to the UTILITY mode, then use the
[F1], [F2], and [F3] function keys to select the system, input filter, or fingered zone param-
eters described below. Press the [F6] function key ("Exit") to exit from the UTILITY mode and
return to the previously-engaged mode when done (you can also press any other mode key to
go directly to the selected mode).
System Parameters
Master Tuning
MIDI Synchronization
The UTILITY mode system parameters include master tuning and basic MIDI
settings that are essential for communication with external equipment. To ac-
cess the system parameters press the [F1] function key ("System") after engag-
ing the UTILITY mode.
This parameter tunes the QY300 tone generator over approximately a whole
tone range ( one semitone) in 1-cent increments (a "cent" is 1/100th of a
semitone). The range is from "–99" through "+00" to "+99". A setting of
"+00" produces normal pitch. Negative values tune down and positive values
tune up.
Determines whether the QY300 is controlled by its own internal clock or MIDI
clock data from an external device.
When set to "Int" the QY300 is controlled by its own internal clock. When
set to "Ext" the QY300 is controlled by a MIDI clock signal received from an
external device such as a sequencer or music computer. Please note that the
QY300 will not run on its own when this parameter is set to "Ext."
The Utility Mode
115
Hide quick links:
Advertisement
Table of Contents
