Table of Contents
Advertisement
DISASSEMBLY INSTRUCTIONS
1. Remove the four screws @) (S-SCREW, MD) and screws
(BVTT +3-6).
gos
Remove the four FFCs from the connector, and remove the
MD MECHANISM in the direction of the arrow. (Fig-1)
PLATE ASSY, .
SIDE L
MD MECHANISM
&
Fig-3
oo
4.
Open the 7ZG-3 A1 in the direction of the arrow (a), remove
the BOSS by pressing it gently in the direction of the arrow
'
.
(b), and remove the 7ZG-3 A1 in the direction of the arrow
ee
(c). Fig-4)
|
%
&
LA
: Sinn
reas
Bac?
HLDR, SHLD BOT
.
Sa
Fig-1
2. Remove the HIDR and SHLD TOP in the direction of the
ES
;
7ZG-3 Al
arrow. (Fig-2)
HLDR, SHLD TOP
Fig-4
a
Note During Assembling:
Rotate the gear fully in the direction of the arrow, and assemble
the main cam into the specified position as shown by the
illustration. (Fig-5)
Eject status
Fully in this direction
Fig-2
3. Remove the two screws ©) (VTT +2-4), and
remove the PLATE ASSY, SIDE L, PLATE, and
SIDE R in the direction of the arrow.
Remove the screw (©) (VW +1.7-5 w/o MFZN2C),
and remove the HEAD and OWH RF325-74A in
the direction of the arrow. (Fig-3)
Cover chassis
Fig-5
Advertisement
Table of Contents
