Parts List Drawer Front 05 pcs Top panel 01 pc Left drawer side 05 pcs Left side panel 01 pc Right drawer side 04 pcs Right side panel 01 pc Drawer back 05 pcs Base 01 pc Drawer Bottom 05 pcs Front rail 04 pcs Large wood slider...
Page 5
Step 1 Attention to the dowel size: ø10*20mm Insert wood dowel (B) into part 6. Ø10*20mm Step 2 Insert wood dowel (B) into part 9. Ø10*20mm Step 3 Insert wood dowel (A) into parts 2, 3, 5, 7, 11, 12 and 15. Ø8*30mm...
Page 6
Step 4 1 - Ensure cam bolt is installed straight and not at an angle. 2 - Tighten cam bolt until shoulder on cam bolt is flush. Do not over-tigh- ten. Fix the Cam bolt (J) in part 1 and 10 using a Philips head screwdriver.
Page 7
Step 6 Attach parts 5 to parts 2 and 3, using screws (D) and Philips head screwdriver. Ø3,5*30mm Step 7 Attach base 4 to body using screw (E) Ø4*40mm and Philips head screwdriver.
Page 8
Step 8 Secure foot 7 to base 4 using screw (C) and Philips head screwdriver. Ø4*25mm Step 9 Align the opening in cam lock to the cam bolt and press into opening. Using a screwdriver, rotate the cam lock until it engages with the cam bolt and locks in place (anywhere between 90-180 degrees).
Page 9
Step 10 Insert wood dowel (A) into parts 6. Ø8*30mm Step 11 Name and address of the supplier and date of production. Secure back panel 8 to body with nails (F) and hammer. Ø10*10mm...
Page 10
Step 12 Attach part 9 to part 10, with screws (C) and Philips head screwdriver. Ø4*25mm Step 13 Attach parts 11, 12 and 15 to part 10 with Cam lock (K) and Philips head screwdriver. P.10...
Page 11
Step 14 Insert part 14 between parts 11 and 12. Attach part 13 to parts 11 and 12 with screws(D), and Phillips head screwdriver. Ø3,5*30mm Step 15 The assembled drawer with this warning must be placed on top of the unit. Insert wood dowel (I) on the inside of all drawers, with the drawer inside the unit after having passed the wood dowel that is in the drawer slide.
Page 12
Step 16 Attach part (L) with screw (O) and washer (M), in the frame of unit top panel using Phillips head screwdriver. With drilling machine make one hole in the wall, insert part (M) in the hole. Secure part (K) with screw (O) and washer (L) in the wall using a Phillips head screwdriver.