Advertisement
Quick Links
Item #: BRLAC4D
Assembly Instruction
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Revised 05/2022 V1
Copyright
2022, by Walker Edison Furniture Co., LLC. All rights reserved.
P.1
c
Advertisement
Related Manuals for Walker Edison BRLAC4D
Summary of Contents for Walker Edison BRLAC4D
- Page 1 Item #: BRLAC4D Assembly Instruction Please visit our website for the most current instructions, assembly tips, to report damage or request parts. www.walkeredison.com Revised 05/2022 V1 Copyright 2022, by Walker Edison Furniture Co., LLC. All rights reserved.
- Page 2 Maintenance Guide To maintain long term performance and easy gliding of your solid wood drawers, we recommend applying wax to the wooden guide rails. 1. Bee's wax is recommended or Paraffin wax from a standard candle can be used. 2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood contact when opening and closing the drawer.
- Page 3 8*20 mm Wood dowel 72 pcs 8*30 mm Wood dowel 4*25mm 3,5*30mm 16 pcs Screw 3*10mm 08 pcs Handles 4*40 mm Screw 04 pcs Screw 7*60 mm Wall anchor Hex Key 01 pcs Glue 02 pcs Washer 04 pcs 20*20 mm Felt Tape measure and hammer recommended for assembly...
- Page 4 IN ORD WA RN BE USE ER TO ING ! D WIT PRE VEN H THE T OVE Ser ious WA LL R TUR tipp ing or fata ATT ACH NIN G ove r. l crus THI S * Use To help hing inju ries...
- Page 5 Step 1 Insert wood dowel (A) into part (9). Insert wood dowel (B) into part (2), (3), (5), (6), (7), (11) and (12). Put the glue (M) in the holes of the pieces (5) and (6) before inserting the wood dowels. (16x) 6 6 6 6 (16x)
- Page 6 Step 3 Use screw (D) to attach part (16) and (17) to part (6), do this step twice . Place the glue (M) in the holes of the pieces (16) and (17), before fitting them to the piece (6). (08x) (04x) Ø...
- Page 7 Step 5 Use screw (D) to attach parts (5) to parts (16) and (17). Put the glue (M) in the holes of the parts (16) and (17) before fitting the part (5). (02x) (04x) Ø 3,5x30 mm Step 6 Attach part (4) in the parts (16) and (17) as shown using screw (I). (04x) Ø...
- Page 8 Step 7 Use screw (D) to finishes the attach on the part (4). Insert felt (O) into parts (16) and (17). (04x) (06x) Ø 3,5x30 mm Step 8 Fit the parts (7) to the part (1).
- Page 9 Step 9 Attach the part (4) to the parts (2), (3) and (7) using the screw (H). (06x) Ø 4x40 mm Step 10 Use screw (D) to finishes the attach on the part (7). Name and address of the supplier and date of production.
- Page 10 Step 11 Attach drawer slides (9) to parts (2) and (3) as shown using screw (C). (24x) Ø 4x25 mm Step 12 Insert the wood dowel (B) into the drawer slides (8). (08x) Ø 8x30 mm P.10...
- Page 11 Step 13 Insert the handle (G) into the part (10) with the screw (F). Secure parts (11) and (12) to part (10) using screw (D). (08x) Please assemble on a clean soft surface to avoid damage. Ø 3,5x30 mm Ø 3x10 mm (16x) Insert panel (13) into grooves and secure part (14) with screw (D).
- Page 12 Step 15 Insert wood dowel (B) on the inside of all drawers while drawer is inside the unit. (08x) Ø 8x30 mm Step 16 P.12...
-
Page 13: Back Panel
Step 17 Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before types of anchors. Drill your wall with a 6mm drill (not included) and Attach screw (D) into washer (N), securing insert hardware (J), securing wall anchor (K) with wall anchor (K), in the frame of superior washer (N) and screw (D) in the wall.