Page 1
Quick Start Keo Blade Power X-Track Power...
Page 2
Quick Start Download the Application and follow the instruction provided within the application. Keo Blade Power X-Track Power...
Page 3
Quick Start Fill in your profile. Keo Blade Power X-Track Power...
Page 4
Quick Start Add your power meter to your product ecosystem. Keo Blade Power X-Track Power...
Page 5
Quick Start Turn on your pedals by charging them for few seconds until the pedals flash (1 in Single / 2 in Dual ). Keo Blade Power X-Track Power...
Page 6
30 Nm: • clockwise for the right pedal. • counterclockwise for the left pedal The left pedal is marked with a ring on the axle (located in the position to tighten the pedals). Keo Blade Power X-Track Power...
Page 7
• Make sure your pedals are turned on by turning the cranks back and forth before connecting them to the app. • You only need to pair the «master» pedal in a dual set. The «slave» pedal will not appear. Keo Blade Power X-Track Power...
Page 8
Quick Start Set the crank length in the app. Perform pedal calibration in the app. (Remove your feet from the pedals and do not move them during calibration). Keo Blade Power X-Track Power...
: Mount the Keo/X-Track cleats on your shoes. GITUDINAL L’axe de l’articulation de votre métatarse interne se situe au centre de l’articulation entre le pied et le gros orteil. Keo Blade Power X-Track Power...
Page 10
Once the pedals are connected, you should: • We recommend to do a zero offset before each ride. B/ Set the crank length on your computer. Keo Blade Power X-Track Power...
Page 11
Quick Start Enjoy your new power meter! Keo Blade Power X-Track Power...