Download
Share
Print this page
Look E Post 2 Evo Manual
  1. Manuals
  2. Brands
  3. Look Manuals
  4. Bicycle Accessories
  5. E Post 2 Evo
  6. Manual

Look E Post 2 Evo Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
MA
NUAL

Advertisement

loading

Related Manuals for Look E Post 2 Evo

Summary of Contents for Look E Post 2 Evo

  • Page 1 NUAL...
  • Page 2 You have selected a LOOK accessory. We thank you for your confidence in our products. By choosing this LOOK accessory, you get a high-tech product, designed in France. Like the vast majority of LOOK products, it is identical to those supplied to major professional teams, and undergoes regular quality-control checks throughout its manufacturing process to assure your total satisfaction.
  • Page 3 LIFE SPAN - WEAR - INSPECTION REQUIRED The life span of LOOK components depends on many factors, such as how it is used and the morphology of the cyclist. Impacts, falls, improper use, or any sudden impact in general, may compromise the structural integrity of the components and significantly reduce their life expectancy.

  • Page 4: Product Overview

    PRODUCT OVERVIEW The E-Post is the concept of an integrated seat post, patented by LOOK, that allows the seat post to be supported by the seat tube of the frame. There is, therefore, no risk of the post slipping into the frame. Anti-rotation is ensured by the non-circular shape of the post and seat tube.
  • Page 6 INSTALLING A DOUBLE OR AN OVAL RAILED SADDLE Position the saddle on the E-Post 2 EVO, Fig 1 the rails on the outside of the seatpost. (Fig.1) Insert the upper support (10) indicated in Fig 5.1 if you want to use a seatpost with round rails Ø7mm and the support (10b) indicated in Fig 5.2 for a saddle with oval rails.
  • Page 7 INSTALLING A MONOLINK® SADDLE (requires optional adapter kit) Grease the screws (7) Fig 6 Position the Monolink® saddle on the E-Post 2 EVO (Fig.6) Put both upper brackets (12) in place and loosely tighten the screw. (Fig.7) Then fix the two lower brackets (11) in place and loosely tighten the screw.

  • Page 8: Removing The Saddle

    REMOVING THE SADDLE To remove your saddle, or adjust its position, loosen the screw, a few turns, that holds the upper brackets in place (11). Gently apply force, alternating between the front and back of the saddle, to loosen the seat brackets.
  • Page 9 Fig 11 Notes : • When a saddle is already installed on the bicycle, you cannot use a torque wrench. However, it is still possible to tighten/loosen the seatpost. To do this, use a 4mm hex or Allen key by inserting it into the opening of the screw head.
  • Page 10 Your new bicycle requires that the seat tube be cut to fit your personal seat height. For this operation, it is best that you contact your authorized LOOK retailer. Introduce the seatpost into the frame and adjust the horizontal position of the saddle.

  • Page 11: Maintenance

    Despite all the care taken in our manufacturing process, if a defect appears or if a repair is required, please contact your authorized LOOK dealer and bring the defective product, along with your proof of purchase receipt, and specify its dysfunction.
  • Page 12 The only recourse within the limits of the LOOK limited warranty, where any warranty is limited to the repair or exchange, at the sole discretion of LOOK, of all or part of the product concerned. Under no circumstances, can LOOK and its agents or distributors...
  • Page 13 It goes without saying that counterfeit products do not benefit from any LOOK warranty and implies the cancellation of all LOOK warranties on any valid LOOK product used with counterfeit products. It also involves the annulment of all accidental, physical, moral, civil and physical liabilities on the part of the company LOOK CYCLE INTERNATIONAL.
  • Page 14 lookcycle.com...