Step Phrase Recording - Yamaha QY-300 Owner's Manual

Step Phrase Recording

If for some reason all 100
user phrases contain
data, use the "Clear
Phrase" job described on page
102 to clear a phrase for
recording.Patterns
The step phrase record mode lets you enter phrases note-by-note, with precise
control over the timing, length, and loudness of each note. You can record
complete phrases using the step mode, or use it to brush-up and add data to an
existing phrase.
1
Select the PHRASE Mode & an Empty User Phrase
Press the [PHRASE] mode key to select the PHRASE mode, place the cursor
at the "category" section of the phrase number and select "US" (user), then
move the cursor to the phrase number and select an empty "user" phrase (the
programmable user phrases are numbered US---001 through US---100). Empty
phrases are indicated by a row of asterisks ("********") following the phrase
number.
2
Engage the Record Ready Mode
Press the [ ] key to engage the record ready mode. The red LED above the
v
[ ] key will light.
v
3
Select the Step Record Mode
Press the [F5] function key ("STEP") to select the step record mode.
Phrases: Creating Patterns
8 1