The Chain Mode - Yamaha QY-300 Owner's Manual

The Chain Mode

The QY300 CHAIN mode makes it possible to specify a sequence of up to 10 songs to be
played back automatically. Each song within the chain can be repeated up to 99 times.
1
Engage the CHAIN Mode
Press the [CHAIN] mode key to go to the CHAIN mode. The CHAIN mode
display shows the "chain" numbers from 1 to 10.
2
Program the Chain
To program a sequence of songs for playback, place the cursor at the appro-
priate chain numbers and use any data entry method to enter the required song
numbers. The number following the song name is the number of times that
song is to be repeated. Place the cursor at the repeat number and use any data
entry method to set the number of repeats for each song.
Song number
In the example chain shown here, the first two songs in the chain will play
through in sequence, then the third song will be repeated twice.
3
Play the Chain
While still in the CHAIN mode, press the [
grammed chain. Playback will stop after the last song. You can also press the
[ ] key to stop playback at any time.
m
The Chain Mode
Number of repeats
] key to play back the pro-
©
113